Harken 7000 Carbo Racing Foil User Manual
Browse online or download User Manual for Hardware Harken 7000 Carbo Racing Foil. Harken 7000 Carbo Racing Foil User Manual
- Page / 8
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
CARBO
®
RACING FOIL
Unit 0, 1, 2, 3
Installation Manual – Intended for specialized personnel or expert users
4364 09/14
Please read these instructions carefully before installing, servicing, or
operating the equipment.This manual may be modified without notice.
See: www.harken.com/manuals for updated versions.
PLEASE SAVE THESE INSTRUCTIONS
Preassembly
Specifications, parts, tools, feeder height,
measuring and cutting foil, drilling trim cap hole. 2-3
Installation
Upper spacer tube, foil and trim cap,
feeder, bottom spacer tube and prefeeder,
halyard lead, chafe guard. 4-6
Operation
Using foil, raising sail, quieting bare foil, misfeads. 6
Troubleshooting
For installation and use. 7
Maintenance, storing, warranty 8
WARNING!: Strictly follow all instructions
to avoid an accident, damage to your vessel,
personal injury or death. See www.harken.com
for additional safety information.
Summary of Contents
Page 1 - RACING FOIL
CARBO® RACING FOILUnit 0, 1, 2, 3Installation Manual – Intended for specialized personnel or expert users4364 09/14Please read these instructions care
Page 2 - Pre-Assembly
2 Unit 0, 1, 2, 3 Carbo Racing Foil Required Phillips head screwdriver Flat-bladed screwdriver Hacksaw Pliers Tape measure Drill with 5 mm (
Page 3
Unit 0, 1, 2, 3 Carbo Racing Foil 3Pre-Assembly1. Lay Out Foil Unroll foil and let it relax for a day or so before installing. 2. Feeder Height
Page 4 - Installation
Splay 5" (127 mm) upper spacer tube with flat bladed screwdriver, slip onto stay and tape.1. Upper Spacer Tube Important: Tape full length of spa
Page 5
Installation Unit 0, 1, 2, 3 Carbo Racing Foil 55. FeederSlip feeder into place and firmly push upwards. Coat screw with blue Loctite® and tighten
Page 6 - Using Carbo Racing Foil
6 Unit 0, 1, 2, 3 Carbo Racing Foil InstallationHalyard Lead Halyard must be parallel to stay. If halyard pulls at an aft angle, it will pull out lu
Page 7 - Troubleshooting
Unit 0, 1, 2, 3 Carbo Racing Foil 7UseProblem Probable Cause SolutionBare foil is noisy in wind. Needs to be stabilized.Wrap jib halyard around f
Page 8 - 97653 14879
N15W24983 Bluemound Rd., Pewaukee, WI 53072 Telephone: (262) 691-3320 • Fax: (262) 701-5780 Web: www.harken.com • Email: [email protected] Harken
More documents for Hardware Harken 7000 Carbo Racing Foil
Related products and manuals for Hardware Harken 7000 Carbo Racing Foil
(8 pages)
(8 pages)
(8 pages)
(2 pages)
(8 pages)© 2020, manymanuals.com. All rights reserved. | 2.199 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals